Sunday, 24 November 2013

Post 3: Embedded Systems

Today I want to build an embedded System.

[I'll add a documentation and a step by step description soon]

First we're going to solder the Power LED and the  . Head up: The orientation of the LED is important, since it has got a positive and negative site. Usually the longer leg is the negative site while the shorter leg is the positive site. After that we will add the 1k resistors (it looks like a suckling pig because it's got a cylindric corpus on frame... and looks a little bit pinky too if you ask me). Resistors don't have an orientation, so you shouldn't be worried about that. Next we will solder the two 104nF Capcitor. They're easily recognizeable since they've got "104" on them printed. If you've done it, you should have a result similar to the picture below: